Start typing to see results...
Find the perfect solution
This subcategory groups the extension products and accessories that don't fit cleanly into the named subcategories: specialty extenders for unusual signal types (DisplayPort with USB, multi-channel signal combinations, specialty broadcast signals), HDBaseT receivers and transmitters sold separately, extender accessories (power supplies, mounting kits, IR emitters and receivers, splitters), wall plate brackets for clean extender installations, fiber transceivers for use with fiber-based extenders, and various niche extension products.
Some installations need extension of signal types that fall outside the standard HDMI, DVI, VGA, audio, and SDI categories. Examples include DisplayPort with USB-C carrying both video and USB peripherals over one cable, multi-input transmitters combining HDMI plus VGA plus audio with built-in scaling, KVM extenders combining keyboard/video/mouse extension in one product, multi-channel audio extenders for pro audio installations, and specialty broadcast signal extenders for genlock, timecode, or other reference signals.
Many HDBaseT extenders are sold as transmitter-receiver pairs, but some installations need just the transmitter side (for example, a wall-plate HDBaseT transmitter feeding into a centralized HDBaseT switcher with built-in receivers) or just the receiver side. Sold-separately units let installers build custom architectures: one transmitter feeding multiple receivers via a one-to-many distribution amp, or multiple transmitters feeding one receiver via a matrix switcher. The transmitter and receiver units must be compatible (typically same manufacturer or HDBaseT-certified equipment).
Accessories that complete extender installations include power supplies (replacements for lost or damaged units, or higher-current supplies for installations with longer power cable runs), IR emitters and receivers (the small components that turn on and off the IR control function), mounting brackets and rack ears, wall plate brackets and faceplates for clean professional installations, and replacement cables. These accessories let installers customize and repair extender installations without buying complete new units.
Wall plates with built-in extender or coupler functionality clean up installations significantly compared to dangling cables. This category includes wall plates with HDMI, VGA, USB, audio, and network keystones; wall plates with built-in HDBaseT transmitters or receivers; wall plates with USB charging; and wall plates with combinations matched to specific room types (boardroom plates, classroom plates, hospitality plates). Quality wall plates are sized for standard electrical boxes and match the room's aesthetic.
Fiber transceivers (SFP, SFP+, QSFP modules) plug into fiber-capable extenders, AV-over-IP equipment, and network switches to add fiber connectivity. They are sold separately so installers can match the transceiver to the specific fiber type (multimode or single-mode), distance (short reach to long reach), and data rate (1 Gbps to 100 Gbps) of the installation. Quality fiber transceivers from established manufacturers are reliable; cheap third-party transceivers may have compatibility issues with specific equipment.
Beyond standard IR emitters and receivers, specialty accessories include IR distribution blocks (centralizing IR signaling for multiple receivers and emitters), IR-over-IP gateways (sending IR commands over the network), IR power injectors, contact-closure interface boxes, and various control system accessories. These let installers handle complex control requirements within an extender-based architecture.
This category serves every commercial AV installation: replacement parts and accessories for existing extender installations, specialty extenders for unusual signal combinations, wall plate accessories for clean professional finishes, fiber transceivers for fiber-based extension, and any niche extension product that doesn't fit a more specific category. Maintaining a stock of common accessories saves significant time on installations and service calls.
A range of specialty extenders and accessories that don't fit the named subcategories: specialty extenders for unusual signal types (DisplayPort with USB-C, multi-input transmitters with built-in scaling, KVM combinations, multi-channel audio), HDBaseT transmitters and receivers sold separately for custom architectures, wall plates with built-in extender or coupler functionality, fiber transceivers (SFP, SFP+, QSFP) for fiber-based extenders, IR accessories (emitters, receivers, distribution blocks, IR-over-IP gateways), mounting hardware, power supplies, and replacement cables.
You need them when building a custom HDBaseT architecture: a centralized HDBaseT switcher with built-in receivers needs separate wall-plate transmitters at source locations; a matrix architecture may need separate transmitter and receiver units to match the matrix's HDBaseT inputs and outputs; or one transmitter needs to feed multiple receivers via a one-to-many distribution amp. Sold-separately units let installers build the right architecture for the installation, rather than being limited to pre-matched pairs.
An SFP (Small Form-factor Pluggable) is a small pluggable module that fits into fiber-capable ports on extenders, AV-over-IP equipment, and network switches, adding fiber connectivity. The module determines what the port supports: fiber type (single-mode or multimode), connector style (LC, SC, ST), and data rate (1 Gbps for standard SFP, 10 Gbps for SFP+, 25 Gbps for SFP28, 40 Gbps and up for QSFP variants). Match the module to the fiber installation: multimode for in-building runs under 500 meters, single-mode for cross-building and longer runs. Always check the equipment's hardware compatibility list for supported modules.
HDBaseT spec versions describe the protocol's capabilities. Spec 1.0 supports 1080p over 100 meters of CAT cable plus control signaling. Spec 2.0 adds USB 2.0 transmission, more network features, and higher bandwidth (still 100 meters at 1080p, with 4K at shorter distances). Spec 3.0 supports full 4K HDR at 100 meters on CAT cable, plus USB and rich control signaling. For new installations, choose Spec 3.0 transmitters and receivers (sometimes called "5Play" for the five signal types they carry); for compatibility with existing HDBaseT infrastructure, match the spec version of the equipment already in place.
Sometimes yes, sometimes no. Many network switches and AV-over-IP encoders/decoders accept generic SFP/SFP+ modules; others restrict to manufacturer-coded modules (often as a warranty or certification requirement). Quality third-party transceivers from established manufacturers are reliable and significantly cheaper than the OEM equivalents. Cheap unbranded transceivers from unknown sources may have compatibility issues or short lifespans. Always check the equipment's hardware compatibility list (HCL) before using third-party transceivers in mission-critical installations.
Every commercial AV installation eventually needs accessories: replacement power supplies for existing extenders, additional IR emitters and receivers as installations expand, wall plate accessories for clean professional finishes during room renovations, fiber transceivers when adding fiber connectivity to an existing extender or AV-over-IP setup, mounting brackets and rack ears for new equipment, and replacement cables. Maintaining a stock of common accessories saves significant time on installations and service calls, and ensures that minor issues don't cause major delays.
On order over $300 and more for US and US territory
We Offer a 30-Day Money Back Guarantee
Full manufacturer's warranty and quality assurance
Safe checkout with trusted payment providers