Start typing to see results...
Find the perfect solution
A plenum is the space, typically above a ceiling or below a floor, that serves as a chamber for cooled or heated air in inhabited buildings. Air conditioning, heating, and ventilation (HVAC) systems use these spaces to move air throughout a building. When cables are installed in plenum spaces, they must be plenum-rated: the cable jacket must be made of materials that resist burning and produce minimal toxic smoke when exposed to fire. This requirement exists because smoke that enters the air-handling system spreads quickly through the building, posing a major life-safety risk.
Standard cable jackets are typically PVC, which burns easily and produces dense, toxic smoke. In a plenum space, the smoke from burning PVC would enter the HVAC return path and spread throughout the building, often faster than the fire itself. Plenum-rated cable uses fire-retardant materials such as Teflon (FEP) or low-smoke zero-halogen (LSZH) compounds that produce minimal smoke and reduce the spread of flame. The cost difference is meaningful, but the safety difference is critical and code-mandated.
The National Electrical Code (NEC) and similar regulations define several cable jacket ratings. Plenum (CMP, CL2P, CL3P) is the most demanding rating, required for air-handling spaces. Riser (CMR, CL2R, CL3R) is for vertical runs between floors in non-plenum spaces. General-purpose (CM, CL2, CL3) is the basic rating for in-wall use within one floor in residential and some light commercial environments. Always specify the right rating: using lower-rated cable where higher-rated is required is a code violation and a life-safety issue.
Nearly every type of low-voltage cable used in modern AV and IT installations comes in plenum-rated versions: HDMI, DVI, VGA, twisted-pair (CAT5e, CAT6, CAT6a), coaxial (RG-6, RG-59), speaker cable, fiber optic cable, control wire, security and CCTV cable, fire alarm cable, and many specialty types. When designing an installation, identify which runs pass through plenum spaces and specify plenum-rated cable for those runs.
Plenum cable typically costs 20 to 100 percent more than equivalent general-purpose cable, depending on the type. The jacket is also less flexible than PVC, which can make installation slightly more difficult, especially in tight conduit pulls. These trade-offs are accepted because plenum cable is mandated where it is required. Always plan and budget for plenum cable in any installation that involves commercial buildings with HVAC return-air plenums.
Plenum cable carries clear markings on the jacket identifying its rating (CMP, CL2P, CL3P, OFNP for fiber, etc.). Building inspectors and fire marshals check these markings during commissioning. Using non-plenum cable in plenum spaces fails inspection, may require complete replacement, and creates significant insurance and liability exposure. Always document the cable specifications and keep the manufacturer's data sheets for the installation records.
Plenum cable is used wherever commercial buildings have return-air plenum spaces: above suspended ceilings in office buildings, schools, hospitals, retail spaces, government buildings, and many institutional and industrial facilities. In houses of worship, theaters, conference centers, and any large commercial space, much of the cable infrastructure runs through plenum and must be plenum-rated. Residential and small commercial installations may use general-purpose cable if the building does not have return-air plenums.
A plenum is the space above a suspended ceiling or below a raised floor that the HVAC system uses to move return air through the building. Plenum cable is required for any cable installed in these spaces because of fire safety: smoke that enters the air-handling system spreads quickly through the building, often faster than the fire itself, posing a major life-safety risk. Plenum-rated cable uses fire-retardant jacket materials (Teflon/FEP or low-smoke zero-halogen) that produce minimal toxic smoke when burned, preventing the air system from distributing dangerous smoke during a fire.
These are progressively more stringent fire-safety ratings. General-purpose cable (CM, CL2, CL3) is the basic rating for in-wall use within one floor in residential and some commercial environments. Riser cable (CMR, CL2R, CL3R) is required for vertical runs between floors in non-plenum spaces; the jacket resists carrying fire from floor to floor. Plenum cable (CMP, CL2P, CL3P) is the most demanding rating, required for air-handling spaces; the jacket produces minimal toxic smoke when burned. Each rating includes the requirements of the lower ratings (so plenum cable can be used anywhere, but general-purpose cannot be used in plenum spaces).
Usually no. Residential construction in most regions does not use return-air plenum spaces in the way commercial buildings do; the air ducts are sealed conduits rather than open ceiling cavities used for return air. Standard CL2 or CL3 cable is acceptable in most residential installations. However, some high-end residential, multi-family housing, or mixed-use buildings may have plenum spaces or may require commercial-grade construction. Always check the local building code and the specific building's design.
Nearly all low-voltage AV and IT cable types: HDMI, DVI, VGA, USB, twisted-pair network cable (CAT5e, CAT6, CAT6a), coaxial cable (RG-6, RG-59), speaker cable, fiber optic cable, control wire, security and CCTV cable, fire alarm cable, IR control cable, and various specialty cables. When designing an installation, identify which runs will pass through plenum spaces, then specify plenum-rated cable for those runs while using less expensive non-plenum cable in walls and floors that are not plenum spaces.
Plenum cable typically costs 20 to 100 percent more than equivalent general-purpose cable, depending on the cable type. For inexpensive cables like CAT5e, the cost difference is moderate. For more complex cables like HDMI or fiber, the premium can be significant. The additional cost is unavoidable where plenum is required by code, so always budget for plenum cable on commercial projects that involve return-air plenum spaces. Trying to save money by using non-plenum cable in plenum spaces is a code violation and a life-safety risk.
Plenum cable carries clear markings on the jacket identifying its rating. Look for "CMP" (communications cable, plenum), "CL2P" or "CL3P" (Class 2/3 cable, plenum), or "OFNP" (Optical Fiber Non-conductive Plenum). The marking is printed at regular intervals along the cable. Some cables also have color-coded jackets (often a specific shade of blue or white) to distinguish plenum cable from non-plenum versions of the same product. Always verify the marking before installation, and keep the manufacturer's data sheets in the installation records for inspection.
On order over $300 and more for US and US territory
We Offer a 30-Day Money Back Guarantee
Full manufacturer's warranty and quality assurance
Safe checkout with trusted payment providers
